info@picotest.com
1-877-914-7426
IMG-LOGO
Home Product CWT Ultra Mini AC Current Probe
IMG-PRODUCT
IMG-PRODUCT

CWT Ultra Mini AC Current Probe

Key Features:

  • Expanded operating temperature range -40ºC to +125ºC
  • Extended (-3dB) bandwidth from a few Hz to 30MHz
  • Current ratings from 30Apk to 6000Apk
  • Improved peak di/dt capabilities up to 70kA/µs
  • 1.7mm (max) cross section, flexible, clip-around coil
  • ±6V into 1MO, and 50O drive capability
  • Loads the circuit under test by only a few pH
  • Positional accuracy typically ±2%

What's included:

  • Rogowski AC Current Probe
  • 1 meter cable
  • 0.5m BNC:BNC cable
  • Alkalai battery 4xAA
  • User manual
  • 1 Year Warranty

Download the product spec sheet here.
Visit the "Support Page" for more downloads.

Buy Now

Questions? Don't hesitate to Contact Us

Subscribe to newsletter
Model Description Price  
CWT UM/015/B/1/80 AC Current Probe 200mV/A, 30A, 116Hz-30MHz, 1m cable, 80mm Coil, 0.5m BNC-BNC output cable.Includes US13S Power Supply.
$1,200.00
US13S CWT UM Regulated Power Supply. 120VAC, 60Hz, 12V ±10%, 300mA, Barrel type: 1.3 x 3.5 x 10mm. Power disconnects battery when plugged into the integrator.
$40.00

If you require a different Type / Battery / Cable Length / Coil Circumference (e.g. CWT UM/03/B/1/80) email info@picotest.com for a quote.



The CWT Ultra-mini has an extremely thin, clip-around Rogowski coil of typically 1.6mm cross-section. Such a thin coil enables currents to be measured in the most difficult to reach parts of a power electronic converter with negligible disruption to the circuit under test.

Specifications
Performance Characteristics Rating
Sensitivity 200mV/A
Peak current 30A
Noise maximum 20mVp-p
Droop 80%/ms
LF (-3dB) bandwidth 116Hz
Peak di/dt 2.0kA/µs
HF (-3dB) bandwidth 30MHz
Output ±6V peak corresponding to ‘Peak Current’ into = 100kO
(e.g. DC 1MO oscilloscope)
±2V peak at half ‘Sensitivity’ into 50O (for long output cables)
Accuracy Variation with conductor position in the coil typically ±2% of reading (for a 2mm² conductor)
Linearity (with current magnitude) 0.05% of reading
Calibration Calibrated to ±0.2% reading with conductor central in the coil loop
DC offset ±3mV maximum at 25°C
Temperature Coil and cable -40°C to +125°C. Integrator 0 to +40°C
di/dt ratings These are ‘Absolute maximum di/dt ratings’ and values must not be exceeded:
Absolute max. peak di/dt: 70kA/µs
Absolute max. rms di/dt: 1.0kA/µs (1.2kA/µs for models CWT1 and above)
Coil voltage 1.2kVpeak. Safe peak working voltage to earth. Rating established by a 3kVrms, 50Hz, 60sec flash test
Coil circumference 80mm
Coil cross section 1.6mm
Output connector BNC (0.5m BNC - BNC cable included)
The specifications are subject to change without notice.

Caution: To avoid equipment damage and/or severe injuries death or death do not use this probe close to voltages higher than 50 VAC or 75 VDC.

Applications include measuring:

Copyright © 2023 Picotest. All rights reserved.