Measuring power distribution network impedance has become an essential measurement for most power systems. Combining the Picotest PI Solution Bundle with your Tektronix Scope, gives you the power to perform ultra-low impedance measurements with ease.
The low cost Picotest J2154A TDR module, with your high-speed Tektronix scope, gives you the power of single ended and differential TDR capability.
Now you can add frequency domain power supply testing capabilities to your Tektronix scope with the Picotest FRA Bundle. Perform essential control loop stability and power supply rejection ratio (PSRR) testing alongside your time domain power supply all in one instrument.
Now you can add frequency domain power supply testing capabilities to your Tektronix scope. The Picotest J2121A High Power Line Injector Supports Converter Input Impedance testing as well as PSRR and low current DC biased inductor testing
The Picotest J2131A, along with your Tektronix oscilloscope, supports power inductor testing under Bias. Together they enable accurate shunt-through inductance measurement of power inductors at various bias levels - up to and including saturation currents up to 125ADC. The bundle enables the 2-port shunt through measurement using the scope’s FRA features *
The bundle enables the 2-port shunt through measurement for your VNA or oscilloscope with FRA features*
* Biased Inductor Measurement Requirements and Notes: The J2131A uses the 2-port shunt through test configuration to perform the inductor measurement. It cannot perform the measurement by itself. The 2-port shunt through measurement REQUIRES a ground loop breaker, such as the J2113A.
The J2131A unit uses the 2-port shunt through test configuration to perform the inductor measurement. It cannot perform the measurement by itself. The 2-port shunt through measurement REQUIRES a ground loop breaker, such as the Picotest J2113A.
Copyright © 2023 Picotest. All rights reserved.
